SLIDER WEIGHTS EXPLAINED

This video is a great resource on how the slider weights we use really help the performance of your Strike or Sector 250. 

In this video we show you how to adjust the alignment in the HiSUN Strike or Sector 250. When you install our lift kits or install new tie rods, this video will help you perform the alignment with easy walk through tips. 

Here is a great video showing the location and identification of key components for the HiSUN Strike and Sector 250. They did a nice job on this. 

Here is a video I made showing steps needed to remove and replace the CVT belt on your HiSUN Strike or Sector 250. Hope some of the short cuts help. 

Here is another video in our series that helps show the teardown and rebuild steps for your HiSUN Strike or Sector 250. The steps are also found in my download section in PDF or PPT format. 

Check out this great video showing some of the products you can install in your Strike or Sector 250. They are all available in the home section area. 

Here is another video from HiSUN showing some important information on the Strike and Sector 250's. Enjoy. 

Another great video from HiSUN to answer the question we all ask....

Here's a video showing you some information about the correct way to change the oil on your strike or sector 250 type. 

Here is a detailed video showing the correct way to install a transmission into the HISUN 250 class of UTV's. 

This was done to help you install the clutch spring in your HISUN 250 type of UTV, while also showing you information on the variator and clutch weights. 

This video is from HiSUN and it helps show you how to properly test the Idle Air Control valve. otherwise knows as the IAC valve. 

This video is from HiSUN and it helps show you hot to properly test the throttle position sensor. 

This video is from HiSUN and it helps show you how to properly test the fuel injector

This video is from HiSUN and it helps show you how to properly test the stator and pick up coil.